Gas Log Fireplace Guide – Studio Retreat

To operate the gas fireplace safely and effectively, follow these simple steps:

1. Power On
Ensure the Power Point is turned ON at the wall.

2. Gas Valve

Turn the yellow gas isolation valve, located on the wall, to the horizontal position (open).

3. Fan Speed & Ignition
On the right-hand side of the fireplace:
• Select your desired fan speed: I (low), II (medium), or III (high).
• The fan will turn on and the unit will automatically ignite after 10–20 seconds.

4. Adjust Flame Intensity
Once the fireplace is lit, adjust the flame:
• Press ( + ) for a higher flame
• Press ( – ) for a lower flame

5. To Turn Off
• Press the ( O ) button (below the low fan speed dial) – the flame will extinguish.
• Turn the yellow gas isolation valve to the vertical position (closed).

Need a visual walkthrough?
[CLICK HERE for our step-by-step pictorial guide.]

⚠️ Feeling unsure?
If at any point you feel unsure about the operation of the fireplace, please:
• Turn off the gas and power
• Utilise the air conditioner to heat the studio instead – it's just as effective and completely fuss-free!